Pumps/Inflation

Like bringing your floor pump on the trail. High-volume barrel fills fat tires fast while fold-out foot pad and flexible hose make inflation a snap. - Head: Presta/ Schrader/ Dunlop Valves - Barrel: Butted Aluminum - Thumb Lock: Plastic - Handle: T-Type Plastic/Kraton - Capacity: 160 psi / 11 bar - Added Features: Fold-out Foot Pad - Flexible Hose - Centerline Mount Bracket - Size (L x W x H): 35 x 5.8 x 3 cm - 13.8" x 2.3" x 1.2' - Weight: 250g / 8.80 oz

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere. And it handles an astounding 600 psi max.

Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads

Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

The Airlift 220 is a single action mountain bike pump that is small enough to bring along on the trail. It features full-body alloy construction with a cross-hatch texturing for better grip in slippery situations. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Rubber seal holds pump handle in place - Includes a frame mount and two 4mm bolts - Pumps up to 80 psi maximum pressure

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable, and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 25g cartridge

Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams

One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again! Self-contained tire repair kit includes: 5 tubeless repair plugs 2 Presta core valves Integrated valve core removal tool Small, strong plugger tool Alloy weatherproof storage capsule

Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!

A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)

A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)

High-volume pump holds securely to bike frames and includes stable folding foot for on-the-go inflation ease. The pump with something to prove The Bontrager Mini Charger is a high-volume, frame-mountable bicycle tire pump that includes a long hose for ease and versatility. A practical folding foot stabilizes while you pump, for faster tire inflation. Product details - High-volume frame mount pump - Stable, folding foot for pumping ease - Long hose gives versatility and saves your valve stems

For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks

A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

Air up your mountain bike tires in a hurry with Topeak's Joe Blow Mountain floor pump. Its large diameter steel barrel, sturdy composite base and oversized padded handle make inflating high volume tires an easy task. For versatility, its double-sided TwinHead pump head tightly grips both Presta and Schrader valves. And, you'll appreciate the easy-to-read gauge.

The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!

This clever dual-gauge floor pump was exclusively designed for low pressure Fat-Bike tires and moderate pressure MTB tires. A massive oversized barrel is 1.5 times larger than a standard floor pump and delivers large air volume to fill oversized tires quickly. A 30 psi (2 bar) gauge shows precise low pressure for Fat-Bike tires while the 75 psi (5 bar) gauge shows higher pressures for MTB tires. An air release button on the TwinHead™ allows for fine-tuning pressure.

This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.

This unique mountain bike specific floor pump features a super-sized barrel that inflates tubes nearly 50% faster than normal floor pumps. It delivers the higher volume required for large off-road tires. The extra-sensitive 3" easy-to-read low pressure analog gauge helps dial in the proper pressure while the large steel base provides stability. - TwinHead DX5 works with Presta, Schrader, and Dunlop valves - Oversize padded handle - Barrel/Base: Painted steel - Gauge: 60psi / 4bar, 3” middle mount analog - Volume Per Stroke: 722 cc - Added Features: Attachments for inflating sports balls and bladder heads, Hose dock - Size: 72 x 26.6 x 14.2cm / 28.3” x 9.1” x 6.7” - Weight: 2.3kg / 5.07lb