Other

Flat Mount Disc Caliper Bracket Bolts

Customize your ride with SRAM bar end plugs.

Chainstay protectors to guard your Salsa frame from scratches and damage.

Replacement dropout screws for the Surly Cross Check. - Bolt length: 40mm

- Surly Chain Tensioner part

Surly Chain Tensioner part

Replacement dropout screws for the Surly Straggler. - Bolt length: 40mm

- Replacement slider for the Surly Tuggnut and Snuggnut

- Replacement thumb screw for the Surly Tuggnut/Snuggnut

Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions

ZIPP Service Course Bar End Plugs, Qty 2.

Surly bearing adjust caps for Mr. Whirly and OD

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

The Stem Shim Adapter helps to accommodate different diameter steerer tube and stem clamp combinations.

• For use with externally routed road frames

Replacement bushings for Cane Creek shocks.

The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Stainless steel pedal washers - Sold in pairs

Looking to attach stuff to your SRAM MatchMaker X or Shimano EV mounts? We have just the goods you're looking for. We had an impossible time finding the proper hardware out in the world that we decided to invest in our own tooling and make them ourselves. The kit includes the infamous curved nut and bolt that is required to attach anything to a SRAM MatchMaker X brake lever and also works in Shimano's new EV direct mount standard. *Adapter not included, only nut and bolt in this kit.

Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes

- Length: 8 mm, 5.5 mm - Material: Steel - Type: Hex - Set of 4 x 2

X01 Eagle Cable Anchor Kit

- Truvativ Crank arm bolt, M12, Capless, For Howitzer, Bag of 2

- Plastic bar end plug pair for 22.2mm extensions

The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.

Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

The M5 bolt is one of the most common types of bolt found on bicycles. This size is used for water bottle mounts, cable anchor bolts, fender/rack eyelets, shifter mounts and more. Problem Solvers offers up sleek black bolts for when silver just won't cut it. And, these aluminum M5 bolts come with captured washers, too.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Heavy duty bolt-on aluminum seatpost clamp.

Dimension Seatpost Binder Bolts - 16g

- Grade 10 chromium steel balls

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

The Problem Solvers SpaceOuts Set includes 2 5mm hex bolts and spacers that let you add space between your bottle cage and frame. This comes in handy on frames with clamp-on front derailleurs and tight clearance for cage mounting.

- Bolt On adapters

Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

Shimano Deore XT M8000-GS Rear Derailleur Cage Plate

This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.

Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.

Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look

Key features: - Adapter to fit Bontrager Race Lite Ergo Bar Ends to Bontrager Satellite Plus IsoZone Handlebars - Only compatible with the Bontrager Satellite Plus IsoZone Handlebar - For most other bar ends, use: Bontrager Satellite Plus IsoZone Bar End Adapter

- Grade 10 chromium steel balls

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

- Syntace x-12 Derailleur hangers and screws are only compatible with frames that have Syntace x-12 Dropouts.

Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.

Air Spring Volume Reduction Kit - 1 x 5000 cubic mm spacer - 2 x inner air can o-rings

Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.

The Problem Solvers Cable Pulley is the correct replacement for their Cross Clamp pulley (Cross Clamp sold separately) and it will also work on most frames that have a mount for a pulley. You get the aluminum pulley and the brass bushing.

Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.

- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10

- PolyCarbonate headset spacers with the FSA logo - Variety of colors, sold in bags of 10

- Chainring bolts for Rival D1 2x cranks

M15/M26 Alloy GXP Crank Arm Bolt Kit