Headsets

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 37g

- Bearing Type: Cartridge - Weight: 86 g - Crown Race: 40 - S.H.I.S Lower: IS52 - S.H.I.S Upper: IS42 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 10 Series has light, tough and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 109g

Cane Creek's engineers were tasked with developing a no-compromise, best-in-class premium headset. With the introduction of their 110-Series, they did just that—choosing optimal materials, engineering the most effective internals and designing the best aesthetics available in a headset. - Technical Description: EC44/33/H12/x - Bottom Type: EC - External Cup - Bottom Head Tube Inside Dia.: 44.00mm - Crown Race Seat Dia.: 33.03mm - Crown Race Type: Aluminum, Dual-Seal - Bottom Stack Height: 12mm - Bottom Bearing Type: Top-quality, sealed stainless steel bearings - Material: 7075 T-6 aluminum - Weight: 58.29 grams

Designed for bicycles with press-fit headsets, the WCS Press Fit Upper Headset features full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease and corrosion-resistant Ti-coated bearings. - Top cap: 7.3 or 12.4mm - Material: Alloy - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Bearing: Sealed cartridge, Ti-coated - Weight: 43g (7.3mm), 49g (12.4mm)

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and a nylon top cover - Hammer: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 12.8mm/11.9mm - Color: Black - Weight: 149g

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty

A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings. - Bearing Type: Cartridge - Weight: 117g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty

The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 7 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44mm headtube.

Chris King led the threadless headset revolution with their NoThreadSet. This iconic, incredibly durable piece of equipment embodies the limitless potential found in simple, high-quality design. Equally appropriate on your road or mountain bike, the NoThreadSet has been ridden to World Cup titles on the trail and to victory at the Tour de France. Featuring precision-machined aluminum cups, King's own in-house stainless steel bearings, a stainless steel base plate, and all ten Chris King colors, each headset is a statement piece that will likely outlast your bike! This model fits bikes with a non-tapered 1-inch headtube and threadless steerer tube. The Sotto Voce models feature toned down graphics that let you sport your Chris King style in a more subtle manner.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty

The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. - Enduro black oxide coated chromium steel bearing included on both the upper and lower - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) - Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum - Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt - 1 Degree Adjustment - Long version is designed for headtube lengths between 115 - 140 mm

- Forged steel cups with caged 5/32" ball bearings - TH-857 features a alloy top cover - TH Series: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 14.9mm/11mm - Color: Black - Weight: 126g

- No. series headsets offer excellent performance and value - No. 8b: 36x45 degree Cane Creek Integrated, or No. 10: Zero Stack shallow available for 1-1/8" applications - No. 10 S.H.I.S.: ZS44/28.6|ZS44/30 - No. 8B S.H.I.S.: IS42/28.6|IS42/30 - Stack: 5.2mm/3.7mm (No. 10), 8mm/1mm (No. 8B) - Color: Black - Weight: 93g (No. 10), 74g (No. 8B)

- Carbon fiber top cover - Upper: Campagnolo angular contact bearings (black seal) - 1-1/8-inch, 45 degrees/ 45 degrees ACB upper - 1.5-inch, 36 degrees/ 45 degrees ACB lower - For tapered 46mm/56mm OD headtube - For 1-1/8-inch to 1.5-inch tapered fork

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

The AER headset lower is a great choice for road and mountain bike applications- a high-quality durable headset lower with durability and lightweight performance in mind. - Steel/Aluminum hybrid bearings

- FSA's core line of headsets with built in cable hangers and barrel adjusters for cyclocross applications - Dual seal, angular contact bearings provide long lasting, smooth rolling performance - Forged and CNC machined 6061 T6 alloy cups - IS: 36x45 degree Cane Creek Integrated, or X: External Cup, traditional available for 1-1/8" applications - 85g

- 1-1/8", 45°/ 45° ACB upper - 1.5", 36°/ 45° ACB lower - Compatible with carbon or alloy head tubes - For tapered 48mm / 56mm OD head tube - For 1-1/8" to 1.5" tapered fork - Carbon fiber top cover - Upper: Campy angular contact bearing (black seal) - Lower: 1.5" 36°/ 45° angular contact bearing (black seal) - Alloy crown race - Stack height 15.5+0.9=16.4mm - 91.5 grams

- 1-1/8" / 1-1/4", 45°/ 45° ACB - Compatible with carbon or alloy head tubes - For tapered 47mm / 52mm OD head tube - For 1-1/8" to 1-1/4" tapered fork - Alloy top cover - Upper : 1-1/8" angular contact bearing black seal) - Lower : 1-1/4" angular contact bearing (black seal) - Stack height 15.6+1=16.6mm - 74 grams

FSA Orbit MX threadless headset features TH brand 36-degree angular contact sealed bearings. - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH Brand 36-degree Angular Contact sealed bearings - 7075 alloy crown race - Laser etched aluminum top cap - EC34/28.6 (36x36) | EC34/30 (36x36)

The FSA Orbit XL-II threadless headset features replaceable sealed cartridge bearings and an AL-7075 crown race. - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH Brand 36-degree Angular Contact sealed bearings - Laser etched aluminum top cap

Drop in lower assembly with crown race. - 45/45 degree angular contact bearing - Titanium coated for corrosion resistance

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: EC34/28.6/H16/K|EC34/30 /H12/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 33.95mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Black Oxide • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 33.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Polymer • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 88.29g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

This is the Bottom for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset. - For 1.5-inch crown race diameter - Stack height: 4mm - 54 grams

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: IS52/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 1mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Weight: 45.25g

Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 10mm, 3mm and 2mm (15mm total) - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1-1/8 integrated headset. - 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).

- Fork crown race for genuine Ritchey headsets - Alloy with 45-degree taper

Hellbender 70 Slam Top Assembly headset.

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty

The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. - Enduro black oxide coated chromium steel bearing included on both the upper and lower - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) - Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum - Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt - 2 Degree Adjustment - Short version is designed for headtube lengths between 90 - 115 mm

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. And, the 110 comes with an amazing 110-year, no-questions-asked warranty! - Technical Description: IS41/28.6/H9/x - Top Type: IS - Integrated - Top Head Tube Inside Dia.: 41.1mm - Stem Clamp Dia.: 28.6mm - Top Stack Height: 9mm (Short), 15mm (Tall) - Top Bearing Type: Top-quality, sealed stainless steel bearings - Material: 7075 aluminum - Weight: 41.81g

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g

Bringing Ritchey's heritage of legendary cycling products into the world of e-bikes and electronic shifting, Tom Ritchey designed a unique headset that allows the cables to be run internally from the stem into standard frames without requiring the frame or fork to be modified. The Logic-E headset is designed to allow Shimano Di2 and STEPS cables to be concealed from view and the wind while protecting them from damage. - Steerer size: 1-1/8" upper - Drop-in (IS) or Press-Fit (S) - Weight: 35-44g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. - Technical Description: EC34/30/H12/x - Bottom Type: EC - External Cup - Bottom Head Tube Inside Dia.: 33.95mm - Crown Race Seat Dia.: 30.015mm - Crown Race Type: Aluminum, Dual-Seal - Bottom Stack Height: 12mm - Bottom Bearing Type: Top-quality, sealed stainless steel bearings - Material: 7075 aluminum - Weight: 42.20g

Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets

The AER headset upper is a great choice for road and mountain bike applications- a high quality durable headset upper with durability and lightweight performance in mind. - Steel/Aluminum hybrid bearings

- 1.5" / 1-1/8", 36°/ 45° ACB - Fits 1-1/8" head tube and 1-1/8" to 1.5" tapered fork - Fits tapered fork to standard 50mm OD head tube - Upper: 36°/ 45° ACB (blue seal) - Lower: 1.5" 36°/ 45° ACB (black seal) - Alloy crown race - Stack height 16.9+13.4=30.3mm - 129 grams

The lightweight Orbit UF uses a mixture of bearing types, with caged ball bearings in the top race and sealed cartridge angular contact bearings in the bottom race. Upper and lower water seals keep the elements at bay. - Forged and CNC machined 6061/T6 Aluminum cups - Patented alignment tip for increased durability and performance - Upper cup uses double sealed 5/32" ball bearings - Lower cup uses a black seal angular contact bearing - Laser etched aluminum top cap - Weight: 99g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Replacement headset uppers from FSA. - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless - Bearing Type: Cartridge - S.H.I.S Upper: IS41 - Upper Stack Height: 8.2

- 1-1/8" / 1.5", 36°/ 45° ACB - For tapered 50mm / 62mm OD head tube - For 1-1/8" to 1.5" tapered fork - Alloy top cover - Upper: Forged alloy cup with ACB (black seal) - Lower: 1.5" CNC machined alloy cup with ACB (black seal) - Stack Height 16.9+2.9=19.8mm - 124.6 grams

- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and an alloy top cover - Mallet: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 15.4mm/13.6mm - Color: Black - Weight: 150g

The FSA Orbit Xtreme Pro threadless headset is constructed of forged and CNC machined 7075/T6 aluminum cups. - Stainless steel Angular Contact Bearings - Stainless steel crown race - 1.5'' patented alignment tip for increased durability and performance - Deep Cup model has 22mm insertion of upper and lower cups

Custom Cane Creek lower race for Salsa.

Comp Logic Threadless Headset - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion

New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 15mm dust cap. With 3mm, and 2mm spacers - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1 1/8-inch integrated headset. - 45º tapered bearings - 41.8mm outer diameter (fits 42mm BMX head tubes).

The Sunday BMX headset is a quality headset at an affordable price: period. It offers one of the lower stack heights on the market and uses a Campagnolo standard spec for 1-1/8-inch integrated headsets. - 45º tapered bearings with 41.8mm outer diameter to fit 42mm BMX head tubes - Compatible with Odyssey GTX Gyro, GTX-R, GTX-S and Snafu Mobeus. - Comes with matching 3mm and 5mm spacers - Weight with/without spacers: 2.1/2.3 oz.

- Bearing Type: Cartridge - Weight: 125g - Crown Race: 40 - S.H.I.S. Lower: ZS56 - S.H.I.S. Upper: ZS44 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.